COLUMN WELD-ON TIES
#359 & #359-C
#359FP & #359FP-C
#359FH
*Deep offset for use with fire-proofing
Used in conjunction with Vee-Byna ® Tie or Column Web Ties. Anchors masonry to structural steel frame while allowing vertical differential movements between steel and masonry. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). Note: 359FP & 359FP-C have exaggerated offset (specify dimension when ordering) to allow for spray-on fireproofing. Backplate restrains compressive loads.
COLUMN WEB & WIRE TIES
#301W & #302W
#351 & #352 Wire Column Tie
#301W
#302W
#352
#301W - 3/16” or 1/4” diameter x 12” long. For use with #359 Weld-On Tie (anchoring masonry to structural column). #302W - 3/16” or 1/4” diameter x 12” long. For use with #359 Weld-On Tie (anchoring masonry to structural column). Includes a 1” flat end for use with #359FH Weld-On Tie. Widths: 2-3/8”, 4”, 6”, 8”, 10”, 12” to accommodate various size CMU. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
#351
#351 - 3”, 5”, 7” or 9” long. For use with masonry that is parallel to column flange. #352 - 8”, 10”, 12” or 14” long. For use with masonry that is perpendicular to column flange. Standard Sizes: 3/16” or 1/4” diameter with 2” Bend and 2-1/2” Hook with 1/2” opening. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
15
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
Powered by FlippingBook