GRIPSTAY ™ CHANNELS & ANCHORS
#361 Embedded
#360 Welded
#362 Surface Mounted
#360 - 7½” long (5½” vertical adjustability). #361 - Furnished with built-in straps for embedment into block back-up. #362 - 6¼” long o.a., furnished with integrally-formed tabs for attachment to masonry. #362-C - 5’ long continuous channel, other lengths available in 7½” increments (15”, 22½”, 30” etc.) Standard Sizes: 14 ga., 12 ga. or 11 ga. thick with 5/16” holes. Finishes: Hot-Dip Galvanized or Stainless Steel.
#362-C with optional Lok-Channel Clip
#362-CX Gripstay ™ Channel Slot
The 362-CX features factory-welded prongs to bridge the insulation and abut the concrete block (or other substrate), affording independent, positive anchorage. The integrity of the insulation is maintained while compression due to positive loads is transferred to face of CMU. Available Sizes: 14 ga., 12 ga., or 11 ga. thick with a standard length of 5’ 0”. Other lengths are available in 7-1/2” increments (example: 15”, 22-1/2”, 30”). Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). U.S. Patents: 5,063,722. Other Patents Pending.
Note: Gripstay Head fits any style H&B Gripstay Channel above for tying masonry to steel columns, concrete, or existing walls. All Gripstay anchors can be modified to fit larger Unistrut channels.
17
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
Powered by FlippingBook