SEISMIC AND CRACK CONTROL ACCESSORIES
Seismiclip ® Interlock System (S.I.S)
For use with H&B wire ties and Continuous Wire. Components snap into the Seismiclip® allowing them to function integrally as a single unit. Available Sizes: #187 - For use with 3/16” diameter ties. #250 - For use with 1/4” diameter ties. Both versions accept 9 ga. and 3/16” continuous wire. Finishes: Impact-resistant, rigid PVC with retaining ridges to securely snap in wire ties and continuous wire.
Byna-Lok ® Wire Tie
SH - Seismic 2X-HOOK ™
H&B’S Seismic 2X-HOOK TM is “swaged” (indented) in two places to accommodate either a 9 gauge or 3/16” continuous wire. A channel is formed that braces the continuous wire and holds it in place. Suitable for standard 3/8” joints. Finishes: Hot-Dip Galvanized & 304 Stainless Steel (316 Special Order). U.S. Patents: 6,789,365; 7,325,366; 8,096,090 & 8,613,175. Other Patents Pending.
Various H&B systems can be fitted with the Byna-Lok® Wire Tie, affording easy and secure insertion of the continuous joint reinforcing wire. More details can be found on page 7.
INTERSECTING WALL ANCHORS
#344 Rigid Partition Anchor
MWT Mesh Wall Tie
For anchoring load bearing walls at an intersection. Fabricated from 1/4” bar stock 1-1/2” wide per code TMS 402/602. Length is custom to job with 2” standard bends on each end. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
For bonding intersecting masonry walls. Conforms to ASTM A740. Available Sizes: 1/2” square by 16 ga. 3”, 4”, 6”, 8”, or 10” wide by 100’ roll. Other sizes available upon request. Finishes: Hot-Dip Galvanized (ASTM A 153) or 304 Stainless Steel. (ASTM E 437).
21
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
Powered by FlippingBook