DIEDRICH TECHNOLOGIES
Diedrich cleaners, strippers and water repellent products provide a safe, cost-effective alternative to damaging processes, such as sandblasting and muriatic acids. This section is only a sampling of the Diedrich product line. For more information, visit www.diedrichtechnologies.com, or call 800-296-0771.
NEW MASONRY CLEANERS
202 New Masonry Cleaner
A more productive general purpose New Masonry Detergent with a combination of organic and inorganic acids, wetting agents and inhibitors for professional use in the final cleanup of new masonry. - Efficiently cleans off residual mortar, job-site soiling, staining and efflorescence. - Will work on brick, stone, tile, exposed aggregate and several varieties of new masonry construction not susceptible to metallic staining. - Will not discolor or damage masonry surfaces.
- Safer and more controllable than raw muriatic acid. Typical Coverage Rates: 150 to 200 square feet/gallon.
Suggested Dilution Rates
1 Part Product:
To:
Concrete and Clay Block
4 parts water
Hard-Burned Pink, Salmon & Tan Brick
6 parts water
Exposed Aggregate Concrete
6 parts water
Structural Tile (Unglazed)
6 parts water
Red Brick
6-8 parts water
8 parts water (If metallic stains are present prior to testing or appear afterwards, do not use 202 — Use 202V Vana-Stop)
Sandstone, Ohio Bluestone, Other Porous Stone
Specialty Pre-Faced Concrete Block & Tile Smooth Finished Precast & Cast in Place Concrete Polished Stone (Granite & Marble) Structural & Ceramic Glazed Tile & Brick
8 parts water
10 parts water
20 parts water (Product could etch stone; testing required)
10-12 parts water
Refer to Diedrich 222 Cleanser for more information
Burnished Masonry
If metallic stains are present prior to testing or appear afterwards, do not use 202 — Use 202V Vana-Stop
Metallic Stain/Discolorations
42
www.h-b.com | 800-645-0616
Powered by FlippingBook