Hohmann & Barnard 2023 Product Catalog

MASONRY SYSTEMS

VENEER ANCHORS & TIES

HB-5213 for Masonry Backup

BL-523 Brass Expansion Bolt

Adjustable veneer anchor designed to provide a high strength connection to brick, block, concrete, terracotta, and other masonry backup systems. - Features the HB-213 back plate with a single 7/16” diameter hole to accept the BL-523 brass expansion bolt for use in masonry. - Fabricated to accommodate various wallboard/ insulation combinations. Specify thickness when ordering.

The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. - Stainless steel internal bolt is surrounded by a brass expansion sleeve that is torque activated. - Providing an easy method of inspection.

HB-200-X

BL-407 Anchor

The HB-200-X features three pronged punch outs that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the stud. - Fabricated to accommodate various wallboard/ insulation combinations. Specify thickness when ordering. - For use with the 2X-HOOK™ . - The eyelets allow pintle insertion (1 1/4” maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances. - Veneer can be adapted for seismic conditions and crack control applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16” diameter continuous wire available). Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).

BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is test rated. - Provides for in-plane differential movement. - Provides vertical movement of up to 1-1/4”. - Addition of Wedge-Lok ® fastener secures insulation in place. - Can be paired with Vee Byna-Tie ® and Seismiclip for use in seismic zones. Base Plate: 16 ga. thick X 2” wide with 1” bend. Length to accommodate various insulation thicknesses. Vee Byna-Tie: 3/16” or 1/4” diameter X 3”, 4”, 5”. Other sizes available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). Note: Combine with BL-523 Expansion Bolt for masonry or concrete backup.