Hohmann & Barnard 2023 Product Catalog

MASONRY SYSTEMS

COLUMN AND BEAM ANCHORS

#353 Column Anchor

#353L Column Anchor with Lok-Bolt

#353 with Lok-Bolt is for anchoring masonry to the building frame while restraining both positive and negative wind load actions when there is a space between the CMU and the column. Made with a slotted hole to accept Positive Lok Bolt to mechanically engage both sides of the flange.

For anchoring masonry to structural column when masonry is perpendicular to column flange and there is no space between the CMU and the column. 1-1/4” wide x 12 ga. thick. Made to order based on flange width and overall length. Other thicknesses (including 1/4” heavy duty) available upon request.

#354 Notched Column Anchor

#355L Column Anchor with Lok-Rod

For anchoring masonry to the building frame while restraining both positive and negative wind load actions. 1-1/4” wide x 12 ga. thick. Other thicknesses (including 1/4” heavy duty) available upon request. Made with a slotted hole to accept Positive Lok Rod.

For anchoring masonry to structural column when masonry is parallel to column flange. Can be used in wall with or without air space. 1-1/2” wide x 12 ga. thick. Notch is 1” wide, beginning 1” from end. Made to order in any length. Other notch sizes available on special order.

#356 Column Anchor

#357 Beam Anchor

For anchoring masonry to structural column when masonry is parallel to column web. Has a slotted hole to accept Positive Lok Rod. Anchors masonry to the building frame while restraining both positive and negative wind load actions. 1/4” thick x 3/4” wide. Available in any length. Custom sizes available. Finishes: Hot Dip Galvanized or Stainless Steel.

For anchoring masonry to structural beams. Standard size is 1 1/4” wide x 12 ga. thick x 12” long. Finishes: Mill Galvanized, Hot Dip Galvanized, or Stainless Steel.

#353, #353L, #354, #355L, #357: U.S. Patent No. 8,904,731; Canadian Patent No. 2,844,459.