ADJUSTABLE REINFORCEMENT SYSTEMS
180-BL Truss with Byna-Lok ® Wire Tie
Loop-Lok ® Truss allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression. - 100% protection against separation of wire tie from reinforcement. (See Code TMS 402/TMS 602) - Loops welded shut to maintain allowable tolerance and system integrity. - Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses. - Loop extends one direction only to allow simple placement of insulation. Slip on Loop-Lok® Washer to
mechanically lock insulation in place. - Also available: 280-BL Ladder Style.
U.S. Patent: 5,408,798; 5,454,200; 6,279,283; 6,668,505; 6,789,365; 6,851,239; 6,925,768; 8,881,488. Other Patents Pending.
Byna-Lok ® Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok ® Wire Tie. Various H&B systems can be fitted with the Byna-Lok ® Wire Tie, affording easy and secure insertion of the continuous joint reinforcing wire. - Swage and mild pitch on legs of the Byna-Lok ® Wire Tie provide an integral track for the continuous joint reinforcement wire. - Economical. Add continuous wire to masonry walls at little additional cost. - Suitable for standard 3/8” mortar joint. - The use of continuous wire in the outer brick wythe is beneficial in providing protection against problems arising from thermal expansion and contraction (crack control). It also allows for a more uniform distribution of lateral forces.
3/16” BYNA-LOK ® WIRE TIE (STANDARD)
9 GA. OR 3/16” CONTINUOUS WIRE
3/16” BOX BYNA-TIE (STANDARD)
LOOP-LOK ® WASHER (OPTIONAL)
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
Powered by FlippingBook