An interactive digital version of complete Hohmann & Barnard, Inc. Print Product Catalog for 2023, 90th Anniversary Edition
HOHMANN & BARNARD, INC.
INNOVATIVE SOLUTIONS FOR THE MASONRY INDUSTRY
AIR & VAPOR BARRIERS / ANCHORS & TIES / CONCEALED LINTELS EXPANSION & CONTROL JOINTS / INSULATED SHELF ANGLE SYSTEMS MASONRY & CONCRETE ACCESSORIES / MASONRY JOINT REINFORCEMENT MOISTURE CONTROL SYSTEMS / RAINSCREEN SUPPORT SYSTEMS REPAIR & RESTORATION SYSTEMS
www.h-b.com
1-800-645-0616
1
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
TABLE OF CONTENTS
MASONRY SYSTEMS
Joint Reinforcement ........................................................................................................................................................................ 5 120 Truss-Mesh, 130 Truss-Tri-Mesh, 140 Truss-Twin-Mesh, 220 Ladder-Mesh, 230 Ladder-Tri-Mesh, 240 Ladder-Twin-Mesh, Continuous Wire Joint Reinforcement Anchoring Systems ............................................................................................................................ 6 170 Truss Eye-Wire, 270 Ladder Eye-Wire Adjustable Reinforcement Systems . ....................................................................................................................................... 7 180 Loop-Lok™ Truss, Byna-Lok® Wire Tie, Loop-Lok™-HS-BL, Loop-Lok™-HS S.I.S. Adjustable Systems for Rubble Stone .................................................................................................................................... 8 Tie HVR-190V, Tie-HVR-195V, Tie-HVR-195VB Veneer Anchors & Ties .................................................................................................................................................................... 9-11 2X-HOOK™, HB-213, VBT-Vee Byna-Tie®, HB-5213, BL-523 Brass Expansion Bolt, HB-200-X, BL-407, #345-BT, #345-BL, DW-10HS Self-Sealing Veneer Anchors ........................................................................................................................................................ 12 X-Seal Anchor, 2-Seal™ Tie Thermal Veneer Anchors .............................................................................................................................................................. 13 Thermal 2-Seal™ Tie, 2-Seal™ Thermal Wing Nut Column and Beam Anchors ......................................................................................................................................................... 14 #353, #353L, #354, #355L, #356, #357 Column Weld-On Ties ...................................................................................................................................................................... 15 #359, #359-C, #359-FP, #359FP-C, #359FH Column Web & Wire Ties .............................................................................................................................................................. 15 #301W, #302W, #351, #352 Dovetail Slots & Anchors .............................................................................................................................................................. 16 #305, #315, #315-BT, #315-BL Gripstay™ Channels & Anchors ................................................................................................................................................ 17-18 #360, #361, #362, #362-C, #362-CX, #363, #363-BT, #363-BL, #365 Systems for High Wind Loads & Cavities Up to 7½” ...................................................................................................... 19 Mighty-Lok ® , HB-213-HS Reinforced Veneer Systems for Seismic and Crack Control ...................................................................................... 20 Channel-Tee Seismic-Notch Anchor System, HB-213S, #345 SV, #364 SV, #303 SV Seismic and Crack Control Accessories .............................................................................................................................. 21 Seismiclip ® Interlock System (S.I.S.), Byna-Lok ® Wire Tie, SH-Seismic 2X-HOOK™ Intersecting Wall Anchors ........................................................................................................................................................... 21 #344 Rigid Partition Anchor, MWT Mesh Wall Tie Stone Anchors & Accessories ................................................................................................................................................... 22-23 PTA - Partition Top Anchors ......................................................................................................................................................... 24 PTA-310, PTA-310-HS, PTA-420-HS, PTA-422, HB-LSA-1, HB-LSA-2, PTA Tubes Concrete Inserts ................................................................................................................................................................................. 25 LW-340, HW-340, Horseshoe Shim, Askew Head Bolt Sharktooth & CSH Inserts ............................................................................................................................................................. 26-27 ST-4, ST-12, CSH-4, CSH-R Rebar Accessories ............................................................................................................................................................................ 28 Rebar Positioner, RB-Twin, RB-Twin W, Mushroom Caps, OSHA Caps Concealed Lintels Systems for Brickwork ........................................................................................................................... 29 Flat Spine, Arched Spine, Surface Mounted Arch Insulated Shelf Angle Systems (TBS) ...................................................................................................................................... 30-32 RAINSCREEN SUPPORT SYSTEMS HB RS EZclad Rainscreen Support System .......................................................................................................................... 34 HB RS FLEXbracket Rainscreen Support Bracket ............................................................................................................ 35
2
www.h-b.com | 800-645-0616
HOHMANN & BARNARD, INC
REPAIR & RESTORATION SYSTEMS
Torq-Lok ® Mechanical Restoration System .......................................................................................................................... 37 500 Series Anchor, 510 Series Anchor, 520 Series Anchor, 530 Series Anchor Panel-Lok ® Mechanical Restoration System ....................................................................................................................... 38 600 Series Anchor, 600-TGL Series Anchor, T-Series Anchor, 610 Series Anchor, 610-S-TGL Series Anchor, Large H Series Anchor, Small H Series Anchor Spira-Lok ® Wall Tie System . ......................................................................................................................................................... 39-40
DIEDRICH TECHNOLOGIES
New Masonry Cleaners ................................................................................................................................................................... 42-43 202 New Masonry Cleaner, 202V VANA-STOP™ New Masonry Cleaner Water Repellents ................................................................................................................................................................................ 44 333 Omegaseal™ Water Repellent Paint Removers & Specialty Cleaners ..................................................................................................................................... 44 606 Multi-Layer Paint Remover, Anti-Graffiti System Masonry Restoration Cleaners ................................................................................................................................................... 45 ENVIRESTORE 100™, 707X Limestone Cleaner Pre-Rinse, 707N Limestone, Neutralizer After-Rinse
AIR BARRIER SYSTEMS
Fluid Applied Air/Vapor Barrier Products ............................................................................................................................. 47-48 ENVIRO-BARRIER™, ENVIRO-BARRIER™ VP, ENVIRO-BARRIER™ Silicone Peel & Stick Air Barriers ................................................................................................................................................................. 48 X-BARRIER™ Air Barrier Accessories & Detail Tapes .................................................................................................................................. 49 ENVIRO-BARRIER™ Liquid-Flash, X-SEAL® Membrane
MOISTURE CONTROL
Flashing Systems ................................................................................................................................................................................ 51-53 TeXtroflash™,Flex-Flash® Flashing, Mighty-Flash™, Mighty-Flash™ SA, Copper Composite Flashing, Copper-Fabric™ NA, Copper-Fabric™ SA Custom Metal Flashing ................................................................................................................................................................... 54 MFL Metal Flashing, MFL Outside & Inside Corners Flashing Accessories ....................................................................................................................................................................... 55-57 Drip Plates/Edges, Drip Plate/Edge Corners, Stainless Steel & Copper Soldered Corners & End Dams, Termination Bars (T1 & T2), PRIMER-SA™, HB Sealant Weep Holes & Mortar Suspension ............................................................................................................................................ 57-58 #341, #342, #343, Mortar Trap™ Weep Vents, QV - Quadro-Vent™, Mortar Web™, Mortar Trap™
EXPANSION & CONTROL JOINTS
NS - Neoprene Sponge, RS - Rubber Control Joint, VS - PVC Control Joint, Slip-Set™ Stabilizer ....... 60 Backer Rod, Soft Rod, Removable Expansion Joint Cap ........................................................................................... 61
NOTES
MATERIAL CONFORMANCE
3
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS MASONRY SYSTEMS
4
www.h-b.com | 800-645-0616
JOINT REINFORCEMENT
120 Truss-Mesh
130 Truss-Tri-Mesh
140 Truss-Twin-Mesh
220 Ladder-Mesh
230 Ladder-Tri-Mesh
240 Ladder-Twin-Mesh
- Butt-welding of cross rods to longitudinal rods (not more than 16”o.c.) enhances bonding capabilities, eliminates projection of cross rods beyond the specified width of reinforcement, and prevents excessive height of wire in limited mortar joints. - Continuous deformation along each longitudinal rod for superior bonding performance. Standard Sizes: (S) Standard: 9 ga. side rods x 9 ga. cross rods. (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods. (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods. Finishes: Mill Galvanized, Hot Dip Galvanized, and Stainless Steel.
Truss-Mesh and Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joint of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. - Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled. - Increases lateral flexural strength. - Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners. - Increases elasticity and performance of masonry walls under various stresses.
Continuous Wire
Continuous wire used in masonry veneer walls helps to provide additional protection against thermal expansion and contraction problems. The wire must be embedded into the mortar joints of anchored veneer walls, per the Uniform Building Code for seismic zones. The wire is secured to the tie anchor, which is fastened to the supporting structure. Continuous wire can be integrated into several of our masonry joint reinforcement or anchor systems: Seismiclip® Interlock System (S.I.S), Byna-Lok® Wire Tie, Seismic Hook Sizes: 9 ga., 3/16” dia., or 1/4” dia.
5
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
JOINT REINFORCEMENT ANCHORING SYSTEMS
170 Truss Eye-Wire
270 Ladder Eye-Wire
Truss Style Adjustable Joint Reinforcement with Eyes and the 2X-HOOK™ for cavity/insulated walls. - 2X-HOOK (pintle) drops into snug eyelet as exterior wall is erected, tying both wythes together. - Allows construction of interior wythe in advance of exterior wythe. - Special design of pintle serves to mechanically secure insulation to the masonry back-up. Standard Sizes: 4” wall - 16” wall. Other widths available on special request. Adjustable reinforcing made to accommodate various insulation / air dimensions. Eyes and Pintles are 3/16” diameter. (S) Standard: 9 ga. side rods x 9 ga. cross rods. (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods. For seismic conditions and crack control add “-SH” to any product number. Example: 270 -SH Finishes: Hot-Dip Galvanized, 304 Stainless Steel (316 Special Order). U.S. Patent: 8,613,175. Other Patents Pending.
HOHMANN & BARNARD’s wire products conform to ASTM A 951 standard specifications for masonry joint reinforcement.
6
www.h-b.com | 800-645-0616
ADJUSTABLE REINFORCEMENT SYSTEMS
180-BL Truss with Byna-Lok ® Wire Tie
Loop-Lok ® Truss allows in-plane vertical and horizontal movement of masonry wythes while restraining tension and compression. - 100% protection against separation of wire tie from reinforcement. (See Code TMS 402/TMS 602) - Loops welded shut to maintain allowable tolerance and system integrity. - Unlike horizontal eyelets, vertical loops will not clog with mortar as construction progresses. - Loop extends one direction only to allow simple placement of insulation. Slip on Loop-Lok® Washer to
mechanically lock insulation in place. - Also available: 280-BL Ladder Style.
U.S. Patent: 5,408,798; 5,454,200; 6,279,283; 6,668,505; 6,789,365; 6,851,239; 6,925,768; 8,881,488. Other Patents Pending.
Byna-Lok ® Wire Tie
New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok ® Wire Tie. Various H&B systems can be fitted with the Byna-Lok ® Wire Tie, affording easy and secure insertion of the continuous joint reinforcing wire. - Swage and mild pitch on legs of the Byna-Lok ® Wire Tie provide an integral track for the continuous joint reinforcement wire. - Economical. Add continuous wire to masonry walls at little additional cost. - Suitable for standard 3/8” mortar joint. - The use of continuous wire in the outer brick wythe is beneficial in providing protection against problems arising from thermal expansion and contraction (crack control). It also allows for a more uniform distribution of lateral forces.
Loop-Lok-HS-BL
Loop-Lok-HS S.I.S
1.
3/16” BYNA-LOK ® WIRE TIE (STANDARD)
2.
9 GA. OR 3/16” CONTINUOUS WIRE
3
3.
3/16” BOX BYNA-TIE (STANDARD)
2
1
4.
SEISMICLIP ®
4
5
5.
LOOP-LOK ® WASHER (OPTIONAL)
7
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
ADJUSTABLE SYSTEMS FOR RUBBLE STONE
Tie-HVR-190V
Designed for a filled cavity condition, the backup is reinforced with truss type reinforcement. - The mason then places the vertical rod into the collar joint by hooking onto the extended truss cross rod. - Rubble stone can be tied easily to the backup using 195/295 Vee Byna-Ties ® .
- Horizontal mortar joints do not have to align. U.S. Patent No. 8,375,667. Other Patents Pending.
Tie-HVR-195V
For use with cavity and insulated walls. The projecting boxes with factory-welded restraint bars prevent in-and-out movement of wire ties. - Modified Vee Byna-Tie® accepts a vertical J-Hook, preventing in-and-out movement of the masonry tie and allowing maximum vertical adjustability. - Ties can be placed wherever the horizontal mortar joint lies without reconfiguring the stone materials. - Available for any wall size. State block, insulation, cavity and rubble stone sizes when ordering. - Ladder style also available (Product Tie-HVR-295V). U.S. Patent No. 8,375,667. Other Patents Pending.
Tie-2R-195VB
For cavity/insulated walls and stud backup. Tie-HVR-195VB is ideal for use on concrete, CMU, metal stud or when masonry backup is already in place and a new veneer is being installed. - L-shaped plate is sized for any thickness of insulation, and has a slotted hole to accept the vertical J-Hook. - Uses the 195/295 Vee Byna-Tie ® . - State insulation, cavity and rubble stone sizes when ordering. U.S. Patent No. 8,904,725. Other Patents Pending.
TIE-HVR Series Size Availability: (S) Standard : 9 ga. side rods x 9 ga. cross rods. (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods.
Projecting box portion (195V or 295V) available 9 ga. or 3/16” dia. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
8
www.h-b.com | 800-645-0616
VENEER ANCHORS & TIES
2X-HOOK TM
Tested and designed to withstand over 200-lbf, in tension or compression, at maximum allowed offset (TMS 402/602) of 1¼” (disengagement of the pintle from the veneer anchor). These results exceed BIA recommendations and the capabilities of standard “round wire” hooks/pintles by over 100%, while maintaining the ASTM A1064/1064M wire specification. - The embedded portion of the 2X-Hook is 3/16” DIA round wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire. Available Lengths: 3”, 4”, 5”, 6” or 7” long. U.S. Patent: 8,613,175.
3/16ӯ WIRE
COMPRESSED VERTICAL LEGS
HB-213 for Stud Backup
Adjustable veneer anchor accommodates various wallboard and insulation combinations up to 6” thick. L-shaped plate with ribs for added strength and two 9/32” diameter holes to accept various screws. Fabricated to accommodate various wallboard/insulation combinations. Specify thickness when ordering. - Slot allows for 2X-HOOK™ insertion and are sized to prevent in-and-out movement beyond allowable tolerances. - Available with Seismic Hook and Continuous Wire. Back Plate: 14 ga. or 12. ga thick. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
VBT- VEE BYNA-TIE ®
For use with H&B’s DW-10 Series Anchors, X-Seal ® Anchors (tying brick veneer to steel studs), or #359 Series Weld-On Ties (tying masonry walls to steel columns). Standard Sizes: 3/16” or 1/4” diameter X 3”, 4”, 5”. Other sizes available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
9
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
VENEER ANCHORS & TIES
HB-5213 for Masonry Backup
BL-523 Brass Expansion Bolt
Adjustable veneer anchor designed to provide a high strength connection to brick, block, concrete, terracotta, and other masonry backup systems. - Features the HB-213 back plate with a single 7/16” diameter hole to accept the BL-523 brass expansion bolt for use in masonry. - Fabricated to accommodate various wallboard/ insulation combinations. Specify thickness when ordering.
The BL-523 Brass Expansion Bolt is for fastening anchors to concrete, block, brick and into mortar joints. - Stainless steel internal bolt is surrounded by a brass expansion sleeve that is torque activated. - Providing an easy method of inspection.
HB-200-X
BL-407 Anchor
The HB-200-X features three pronged punch outs that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the stud. - Fabricated to accommodate various wallboard/ insulation combinations. Specify thickness when ordering. - For use with the 2X-HOOK™ . - The eyelets allow pintle insertion (1 1/4” maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances. - Veneer can be adapted for seismic conditions and crack control applications by adding the optional H&B Seismic Hook and Continuous Wire (9 gauge or 3/16” diameter continuous wire available). Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
BL-407 is a wire tie and plate combination system that provides adjustability, strength, stiffness, positive connection, corrosion resistance, and is test rated. - Provides for in-plane differential movement. - Provides vertical movement of up to 1-1/4”. - Addition of Wedge-Lok ® fastener secures insulation in place. - Can be paired with Vee Byna-Tie ® and Seismiclip for use in seismic zones. Base Plate: 16 ga. thick X 2” wide with 1” bend. Length to accommodate various insulation thicknesses. Vee Byna-Tie: 3/16” or 1/4” diameter X 3”, 4”, 5”. Other sizes available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). Note: Combine with BL-523 Expansion Bolt for masonry or concrete backup.
10
www.h-b.com | 800-645-0616
VENEER ANCHORS & TIES
#345-BT Flexible Tie
#345-BL Flexible Tie
For tying masonry to concrete or CMU backup with a flexible (not rigid) connection. It is comprised of a Vee Byna-Tie® with wrap-around metal strap to allow for installation with Seismiclip® and Continuous Wire. Available Sizes: Wrap-around strap - 12 ga thick X 3/4” wide with 5/16” hole Vee Byna-Tie - 3/16” or 1/4” diameter X 3”, 3½”, 4”, 4½”, or 5” long. Other lengths available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Byna-Lok ® Tie fitted with same strap as above. Swaged and pitched Byna-Lok ® allows for addition of the continuous wire without need for the Seismiclip. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
DW-10HS with Vee Byna-Tie ® DW-10HS with S.I.S.
DW-10HS with Byna-Lok ® Tie
DW-10HS offers 14 ga. or 12 ga. thick X 5-1/2” long with over 3” of vertical adjustability. Features the Vee Byna-Tie to anchor brick veneer to steel stud. For anchoring brick veneer to metal stud, masonry, concrete or wood backup. Primarily for use when there is no insulation and little potential for wallboard deterioration.* DW-10-HS with the Seismiclip ® for use with Continuous Wire in seismic conditions and crack control. DW-10-HS with the Byna-Lok ® Tie for easy installation of continuous wire while maintaining a standard 3/8” mortar joint. * For insulated walls, or when there is concern about wallboard deterioration, please see our X-SEAL ® Anchor.
11
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
SELF-SEALING VENEER ANCHORS
X-SEAL Anchor
The X-SEAL® Anchor features a patented pronged leg design that seals the sheathing from air and moisture. - Pronged legs bridge the sheathing and abut the steel stud, affording independent, positive anchorage. - Compression of the sheathing by positive loads is also prevented. - Pronged legs are rib-stiffened and oriented closer to each other, enhancing the compressive strength by over 20%. - Owners, architects and masons can be confident in over 3 decades of proven strength and performance. - Capable of withstanding 100# working loads in tension and compression without deforming or developing play in excess of 0.05”. - Provides 100% protection against separation of wire tie from anchor (See Code TMS 402/602). - Installed before the veneer allowing for easy on-site inspection. - Secures insulation to the backup better than staples or screws. - Meet or exceed requirements of the Commonwealth of Massachusetts State Building Code for air leakage and water penetration. Contact H&B’s technical department for test results. Standard Sizes: Available in leg lengths from ½” - 4½” to accommodate wallboard and/or insulation. Finishes: Hot-Dip Galvanized or Stainless Steel (Type 304). U.S. Patents: 6,925,768; 6,941,717; 7,587,874; 7,845,137 & 7,562,506 CAN. Patents: 2,458,008 & 2,458,012. Other Patents Pending. An innovative single-screw veneer tie for metal stud construction. - Fabricated from Zamac zinc with a premium quality organic polymer coating. - Has a dual-diameter barrel with factory-installed EPDM washers to seal both the face of the insulation and the air/vapor barrier. - Improvement over single barrel types which only seal at the insulation and render the vapor barrier susceptible to air and moisture infiltration if not precisely installed (perfectly perpendicular to the stud). - The dual-barrel has an integrated #12 self-drilling screw. - The projecting eyelet accepts the 2-Seal™ Byna-Lok ® Wire Tie. - Barrel portion available in 5/8”, 1”, 1½”, 2”, 2½”, 3”, 3½”, 4”, 4½”, 5”, 5½”, 6”, and 6½” lengths to accommodate insulation/wallboard (sheathing). For concrete, CMU, masonry or wood stud backup applications, please use Concrete 2-Seal™ Tie. For steel stud with wood or gypsum sheathing, use Standard 2-Seal™ Tie. U.S. Patent: 8,037,653. CAN. Patent: 2,690,819. Other Patents Pending.
2-Seal ™ Tie
Installation chuck adapter sold separately.
12
www.h-b.com | 800-645-0616
THERMAL VENEER ANCHORS
Thermal 2-Seal ™ Tie
Thermal transfer through the wall cavity is a major source of lost energy, and ultimately, dollars spent on heating and cooling. Hohmann & Barnard has engineered an innovative new anchor to solve this problem. The Thermal 2-Seal™ Tie features a dual-diameter Stainless Steel barrel to seal at both the insulation and the air barrier while reducing thermal transfer through the cavity to as little as 1/7 the conductivity of standard zinc barrels. - A large diameter washer secures insulation to the back up, while a second smaller washer completely seals the air barrier for a continuous membrane. - Stainless Steel Barrel reduces thermal conductivity by as much as 1/7 of a standard zinc barrel and 1/3 compared to carbon steel barrels. - A proprietary UL-94 coating creates a thermal break at the insulation. - Uses a 2-Seal Byna-Lok Wire Tie for easy addition of a continuous wire. - Barrel available in lengths of 5/8”, 1”, 1½”, 2”, 2½”, 3”, 3½”, 4”, 4½”, 5”, 5½”, 6”, and 6½” lengths to accommodate insulation. Other sizes available upon request. U.S. Patent: 8,037,653 & 9,140,001. Other Patents Pending. The Thermal 2-Seal™ Wing Nut Anchor is an innovative single screw veneer tie for metal stud construction that features a Stainless Steel Barrel with two washers to seal at both the insulation and the air barrier just like the Thermal 2-Seal anchor above with the following added features: - A UL-94 coating encapsulates a steel wing, creating a thermal break at the insulation. - Wing is reinforced by a steel core to maintain integrity of the anchoring system in case of fire making it superior to clip-on plastic wings that will melt if exposed to extreme heat. - Wing accepts a standard, seismic or Mighty-Lok ® Pintle and spins to easily orient pintles/hooks with masonry joints. - Wing is adjustable up to 1/2” to accommodate various insulation thickness’ and secure insulation to the backup, eliminating convection hoop. Polymer-coated Stainless Steel barrel has an integrated 5/16” hex head for easy installation and is available in lengths of 5/8”, 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4” and 6-1/2” to accommodate insulation. Other sizes available upon request. U.S. Patent: 7,415,803; 8,613,175; D702,544 & D706,127. Other Patents Pending.
2-Seal ™ Thermal Wing Nut
Metal Type
Thermal Conductivity
Available Anchors: Standard Thermal & Thermal Wing Nut 2-SEAL™ - for use in steel stud with wood or gypsum sheathing. Concrete Thermal & Concrete Thermal Wing Nut 2-SEAL™ - for concrete, wood, or masonry backup.
AISI-SAE 1020 (Plain Carbon Steel)
0.52 (W/cm K)
Stainless Steel (Type 304)
0.15 (W/cm K)
Zinc Alloy (Galvanizing)
1.1 (W/cm K)
13
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
COLUMN AND BEAM ANCHORS
#353 Column Anchor
#353L Column Anchor with Lok-Bolt
#353 with Lok-Bolt is for anchoring masonry to the building frame while restraining both positive and negative wind load actions when there is a space between the CMU and the column. Made with a slotted hole to accept Positive Lok Bolt to mechanically engage both sides of the flange.
For anchoring masonry to structural column when masonry is perpendicular to column flange and there is no space between the CMU and the column. 1-1/4” wide x 12 ga. thick. Made to order based on flange width and overall length. Other thicknesses (including 1/4” heavy duty) available upon request.
#354 Notched Column Anchor
#355L Column Anchor with Lok-Rod
For anchoring masonry to the building frame while restraining both positive and negative wind load actions. 1-1/4” wide x 12 ga. thick. Other thicknesses (including 1/4” heavy duty) available upon request. Made with a slotted hole to accept Positive Lok Rod.
For anchoring masonry to structural column when masonry is parallel to column flange. Can be used in wall with or without air space. 1-1/2” wide x 12 ga. thick. Notch is 1” wide, beginning 1” from end. Made to order in any length. Other notch sizes available on special order.
#356 Column Anchor
#357 Beam Anchor
For anchoring masonry to structural column when masonry is parallel to column web. Has a slotted hole to accept Positive Lok Rod. Anchors masonry to the building frame while restraining both positive and negative wind load actions. 1/4” thick x 3/4” wide. Available in any length. Custom sizes available. Finishes: Hot Dip Galvanized or Stainless Steel.
For anchoring masonry to structural beams. Standard size is 1 1/4” wide x 12 ga. thick x 12” long. Finishes: Mill Galvanized, Hot Dip Galvanized, or Stainless Steel.
#353, #353L, #354, #355L, #357: U.S. Patent No. 8,904,731; Canadian Patent No. 2,844,459.
14
www.h-b.com | 800-645-0616
COLUMN WELD-ON TIES
#359 & #359-C
#359FP & #359FP-C
#359FH
*Deep offset for use with fire-proofing
Used in conjunction with Vee-Byna ® Tie or Column Web Ties. Anchors masonry to structural steel frame while allowing vertical differential movements between steel and masonry. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). Note: 359FP & 359FP-C have exaggerated offset (specify dimension when ordering) to allow for spray-on fireproofing. Backplate restrains compressive loads.
COLUMN WEB & WIRE TIES
#301W & #302W
#351 & #352 Wire Column Tie
#301W
#302W
#352
#301W - 3/16” or 1/4” diameter x 12” long. For use with #359 Weld-On Tie (anchoring masonry to structural column). #302W - 3/16” or 1/4” diameter x 12” long. For use with #359 Weld-On Tie (anchoring masonry to structural column). Includes a 1” flat end for use with #359FH Weld-On Tie. Widths: 2-3/8”, 4”, 6”, 8”, 10”, 12” to accommodate various size CMU. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
#351
#351 - 3”, 5”, 7” or 9” long. For use with masonry that is parallel to column flange. #352 - 8”, 10”, 12” or 14” long. For use with masonry that is perpendicular to column flange. Standard Sizes: 3/16” or 1/4” diameter with 2” Bend and 2-1/2” Hook with 1/2” opening. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
15
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
DOVETAIL SLOT & ANCHORS
#315 Flexible Dovetail Brick Tie
#305 Dovetail Slot
The #315 Flexible Dovetail Brick Tie permits horizontal and vertical movement of the masonry wall while restraining tension and compression. Can be surface mounted or used with #305 Dovetail Slot. Available Sizes: Dovetail Head - 14 ga or 12 ga thick X 1” wide. Vee Wall Tie - 3/16” or 1/4” diameter X 3”, 3½”, 4”, 4½”, or 5” long. Other lengths available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
For anchoring masonry to concrete with dovetail ties, accepts all H&B dovetail anchors. Standard Sizes: 1” wide back x 1” deep x 22 ga., 18 ga. or 16 ga. thick by 10’ long foam filled. 24 ga. Also available in Stainless Steel only Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). Important: We are not responsible for incompatibility if ties or slots are interchanged with those of other manufacturers.
#315-BL BYNA-LOK ® Flexible Dovetail
#315-BT Flexible Dovetail Brick Tie
#315-BL includes the Byna-Lok Tie ® to accept Continuous Wire.
#315-BT includes the S.I.S. Seismiclip Interlock System® for use in seismic conditions and for crack control. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Available Sizes: Byna-Lok Tie - 3/16” X 3”, 4”, or 5” long. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
16
www.h-b.com | 800-645-0616
GRIPSTAY ™ CHANNELS & ANCHORS
#361 Embedded
#360 Welded
#362 Surface Mounted
#360 - 7½” long (5½” vertical adjustability). #361 - Furnished with built-in straps for embedment into block back-up. #362 - 6¼” long o.a., furnished with integrally-formed tabs for attachment to masonry. #362-C - 5’ long continuous channel, other lengths available in 7½” increments (15”, 22½”, 30” etc.) Standard Sizes: 14 ga., 12 ga. or 11 ga. thick with 5/16” holes. Finishes: Hot-Dip Galvanized or Stainless Steel.
#362-C with optional Lok-Channel Clip
#362-CX Gripstay ™ Channel Slot
The 362-CX features factory-welded prongs to bridge the insulation and abut the concrete block (or other substrate), affording independent, positive anchorage. The integrity of the insulation is maintained while compression due to positive loads is transferred to face of CMU. Available Sizes: 14 ga., 12 ga., or 11 ga. thick with a standard length of 5’ 0”. Other lengths are available in 7-1/2” increments (example: 15”, 22-1/2”, 30”). Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order). U.S. Patents: 5,063,722. Other Patents Pending.
Note: Gripstay Head fits any style H&B Gripstay Channel above for tying masonry to steel columns, concrete, or existing walls. All Gripstay anchors can be modified to fit larger Unistrut channels.
17
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
GRIPSTAY ™ CHANNELS & ANCHORS
#363 Flexible Gripstay Anchor
#363-BT Flexible Gripstay with S.I.S.
Includes Seismiclip® for use with Continuous Wire in seismic zones. Gripstay head is 14 ga. thick x 1-1/4” wide. Vee Byna-Tie ® portion is 3/16” or ¼” dia. x 3”, 4”, 5”, 6” 7” or 9” long. Other sizes available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Gripstay head is 14 ga. thick x 1-1/4” wide. Vee Byna-Tie ® portion is 3/16” or ¼” dia. x 3”, 4”, 5”, 6” 7” or 9” long. Other sizes available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
#363-BL Byna-Lok Flexible Gripstay
#365 Bent Gripstay Anchor
Byna-Lok® portion is 3/16” dia. x 3”, 4” or 5” long. Other sizes available upon request. Gripstay head is 14 ga. thick x 1-1/4” wide. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Standard - 1¼” wide X 16, 14, or 12 ga. thick. Bend is 1” long. Longer bends available upon request. Gripstay head is 14 ga. thick x 1-1/4” wide. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
18
www.h-b.com | 800-645-0616
SYSTEMS FOR HIGH WIND LOADS & CAVITIES UP TO 7½”
Mighty-Lok ®
2 1/4” EFFECTIVE ADJUSTABILITY
FLATTENED & SERRATED END
COMPRESSED VERTICAL LEGS
Mighty-Lok® adjustable joint reinforcement has been redesigned to feature the Mighty-Lok® Hook. The ¼” diameter hook still features a flattened and serrated pintle but now has compressed vertical legs for increased adjustability up to 2¼”. This allows for optimum performance in today’s multi-wythe construction with extra-wide cavity walls or when mortar joints are not in close alignment. This is the only ¼” diameter system that meets the TMS-402 code by allowing for a 3/8” mortar bed. For extra-wide cavity conditions and high wind loads. Modified eyelets and pintles afford usage where high strength requirements are present and standard eyelets and pintles would fail (including extra-wide cavity conditions and high wind loads). Also designed for usage where standard eyelets and pintles would fail due to greater than normal misalignment of mortar joints between the 2 wythes. Modified eyelets engage pintles in conformance with existing codes (less than 1/16” mechanical play). The Mighty-Lok® Hook is flattened and serrated for superior bonding with mortar and offers 2¼” of vertical adjustability.
Available Truss style (170-ML) or Ladder style (270-ML).*SHD wire required. U.S. Patent No. 6,668,505; 8,122,663; & 8,613,175 Other Patents Pending.
HB-213-HS High-Strength Veneer Anchor System
For heavy-duty applications, the HB-213-HS High-Strength Veneer Anchor System incorporates the Mighty-Lok ® Hook. - Flattened and then serrated for superior bonding with mortar while maintaining a 3/8” mortar joint per Code TMS 402/602. - Ideal for usage when the offset of engagement between pintle and anchor is greater than 1-1/4” (limit set by standard TMS-402/602).
- Longer leg lengths are available on special order, subject to loading requirements. - Ideal for wide cavity conditions, where a standard 3/16” pintle would not satisfy lateral load requirements. (Note: The 2016 TMS 402/602, adopted by the 2018 IBC, allows maximum cavity spans of up to 6 5/8” with restrictions, prescriptively. Additionally, 4 5/8” cavity spans are allowable with no special rules.) Standard Backplate Available: 14 ga. or 12 ga. U.S. Patent: 8,122,663 & 8,613,175 . Other Patents Pending.
19
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
REINFORCED VENEER SYSTEMS FOR SEISMIC AND CRACK CONTROL
Channel-Tee Seismic-Notch Anchor System
Ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface mounted to the back up. The Seismic-Notch Anchor is then easily inserted into the channel anywhere along the vertical length to conveniently fit wherever the mortar joint lies. Continuous joint reinforcing wire is easily inserted into the seismic notches of each anchor. - Thin 5/8” profile of channel is ideal for tight cavity conditions. - Channel provided in 10’ lengths. - Holes drilled 12” on center in channel. - Also suitable for use on concrete or CMU. Seismic-Notch Anchor available 14 ga. thick by 3”, 3-1/2”, 4”, 4-1/2” or 5” long. (Other sizes available upon request). Available Hot-Dip Galvanized or 304 Stainless Steel.
HB-213S Veneer Anchor
#345 SV Seismic-Notch Veneer Anchor
Formerly known as T-LOK TIE™. The configuration of the HB-213S Seismic Plate Pintle allows easy insertion into slot, while preventing future disengagement. This also prevents the tie from being installed beyond allowable eccentricity. Standard Sizes: Pintle portion: 3½” or 4½” long, 12 ga. or 11 ga. thick. Backplate portion is fabricated to accommodate various wallboard/insulation combinations. Specify thickness when ordering.
Same availability as above with bent end and 9/32” diameter hole to accommodate hardware. Includes bent end and 9/32” diameter hole to accommodate hardware. Made to order in any length.
#303 SV Seismic-Notch Dovetail Anchor
#364 SV Seismic-Notch Gripstay ™ Anchor
1 ¼” wide x 14 ga. or 12 ga. thick with a standard dovetail head. Includes a standard Gripstay notch. Use with any style H&B Gripstay Channel. Made to order in any length.
1¼” wide x 14 ga. or 12 ga. thick with a standard dovetail head. Use with the #305 dovetail slot. Made to order in any length.
20
www.h-b.com | 800-645-0616
SEISMIC AND CRACK CONTROL ACCESSORIES
Seismiclip ® Interlock System (S.I.S)
For use with H&B wire ties and Continuous Wire. Components snap into the Seismiclip® allowing them to function integrally as a single unit. Available Sizes: #187 - For use with 3/16” diameter ties. #250 - For use with 1/4” diameter ties. Both versions accept 9 ga. and 3/16” continuous wire. Finishes: Impact-resistant, rigid PVC with retaining ridges to securely snap in wire ties and continuous wire.
Byna-Lok ® Wire Tie
SH - Seismic 2X-HOOK ™
H&B’S Seismic 2X-HOOK TM is “swaged” (indented) in two places to accommodate either a 9 gauge or 3/16” continuous wire. A channel is formed that braces the continuous wire and holds it in place. Suitable for standard 3/8” joints. Finishes: Hot-Dip Galvanized & 304 Stainless Steel (316 Special Order). U.S. Patents: 6,789,365; 7,325,366; 8,096,090 & 8,613,175. Other Patents Pending.
Various H&B systems can be fitted with the Byna-Lok® Wire Tie, affording easy and secure insertion of the continuous joint reinforcing wire. More details can be found on page 7.
INTERSECTING WALL ANCHORS
#344 Rigid Partition Anchor
MWT Mesh Wall Tie
For anchoring load bearing walls at an intersection. Fabricated from 1/4” bar stock 1-1/2” wide per code TMS 402/602. Length is custom to job with 2” standard bends on each end. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
For bonding intersecting masonry walls. Conforms to ASTM A740. Available Sizes: 1/2” square by 16 ga. 3”, 4”, 6”, 8”, or 10” wide by 100’ roll. Other sizes available upon request. Finishes: Hot-Dip Galvanized (ASTM A 153) or 304 Stainless Steel. (ASTM E 437).
21
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
STONE ANCHORS & ACCESSORIES
Hohmann & Barnard can fabricate custom stone anchors from mild steel up to 1" thick Stainless Steel. H&B has over 80 years of fabrication expertise with jobs spanning the 50 United States, Canada, and world wide.
#304
#307
#309
#309-H
#365
#366
#367
#367-H
#401R
#402R
#408
#414
#405
#406
#407
#422
#423
#424
#425
#428
22
www.h-b.com | 800-645-0616
STONE ANCHORS & ACCESSORIES
#429
#431
#432
#433
#434
#435
#439
#441
#442
#443
#444
#450
#451
#452
#515
SRX-10/11/12
SRX-10
SRX-11
SRX-12
SRX-16
C-3
NAIL-IN TYPE EXP. ANCHOR
EMBEDDED CHANNEL SLOT
CONCRETE SCREW WEDGE EXP. BOLT
SLEEVE EXP. BOLT
23
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
PTA - PARTITION TOP ANCHORS
PTA SERIES PARTITION TOP ANCHORS are engineered products that are project-specific, and have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above while resisting positive and negative lateral shear loads, without transferring compressive loads to the masonry wall below. PTA Series Anchors are suitable for construction using steel or concrete. PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete or steel by any of the methods illustrated. The vertical joint is then filled with mortar, fully surrounding tube. Other sizes available for heavy-duty applications.
PTA-310 & PTA-310-HS
PTA-310 - #3 rebar rod with 3/16” thick Dovetail Head. PTA-310-HS - Standard - 5/8” rod with 1/4” thick Dovetail Head. - For use on concrete construction. - Must be used in conjunction with H&B #305 Dovetail Slot and PTA Tubes.
PTA-310
U.S. Patent 8,978,326. Other Patents Pending. Finishes: Hot-Dip Galvanized or Stainless Steel.
PTA-310-HS
PTA Tubes Grey plastic Tubes filled with compressible polyethylene filler. For use with PTA-310, 310-HS and 420-HS anchors.
PTA-420-HS
Standard - #3 rebar with 3/16” thick plate containing 5/16” diameter holes - For use on concrete or steel beam construction. - Use with PTA Tubes. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
PTA-422
HB-LSA-1 & HB-LSA-2
HB-LSA-1
HB-LSA-2
Standard - 12 gauge thick with 2-1/2” standard bends. Widths to fit 4”-12” block. Use as a Lateral Support Anchor for concrete or steel beam where the slab and wall are offset. LSA Anchors comply with CSA A370-14. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Standard - 12 gauge thick with 2” standard bends. Widths to fit 4”-12” block. Use on concrete or steel construction. Provided with two 7/16” holes for mounting hardware. Finishes: Mil Galvanized, Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
24
www.h-b.com | 800-645-0616
CONCRETE INSERTS
LW-340
HW-340
Wedge inserts are embedded into concrete slabs. Nail holes in the back of the insert allow easy nailing to forms. When the forms are stripped, the open face of the insert is flush with the concrete. The beveled head of the askew head bolt engages the internal wedge shape of the insert and produces an automatic tightening action when a shear or dead load is placed on it. LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. HW-340 Standard Wedge Insert must be installed at least 1-1/2” from bottom of slab. Both anchors require a minimum of 1-1/2” of concrete above the top of the insert. Finish: Hot-Dip Galvanized.
Performance Data Shear
LW-340 HW-340
A
B
Tension Concrete Strength
Torque
BOLT DIA.
3/4"
3/4"
LW-340 HW-340
17,305 lbs. 16,650 lbs.
17,367 lbs.
4,125 psi
150 ft./lbs. 150 ft./lbs.
A
2-3/8"
2-1/2"
13,093 lbs. 4,125 psi
B
1-3/16"
1-3/16"
C
C
5-1/2"
4"
All values listed are ultimate capacities in pounds which should be reduced by a minimum safety factor of three to determine the allowable working loads. Note: Rebar hairpins are not required to achieve published loads.
D
D
3"
1-3/4"
E
E
3-1/2"
2"
F
F
7/8"
7/8"
Horseshoe Shim
Askew Head Bolt
Horseshoe Shim for Wedge Inserts. 3” or 4” tall by 1/8”, 1/4”, or 3/8” thick. Other sizes available upon request. Finishes: Mill Galvanized, Hot-Dip Galvanized, or 304 Stainless Steel (316 Special Order).
Askew Head Bolt for Wedge Inserts. 3/4” dia. x 2”, 2-1/2”, 3” or 4” long. Other Lengths available upon request. Finishes: Hot-Dip Galvanized or 304 Stainless Steel (316 Special Order).
Carbon Steel Stainless Steel
60,000 psi minimum tensile strength 70,000 psi minimum tensile strength
25
For material conformances, submittal sheets, CAD drawings and SDS sheets visit: www.h-b.com
MASONRY SYSTEMS
SHARKTOOTH & CSH INSERTS
ST-4
ST-12
ST-12 Insert is cast into concrete walls to accept stone anchors.
ST-4 Brick relief angle at concrete beam.
Sharktooth Insert has various applications and is capable of developing working loads up to 8,000#/ft. in both shear and tension. It is adjustable along virtually its entire length, and also allows in and out adjustment, while still resisting shear and tension loads. Available in Hot-Dip Galvanized or Type 304 Stainless Steel (Type 316 available on special order). It is fabricated in lengths from 3” to 12’-0” long, and can be custom designed for project-specific applications, such as radii or specific lengths. The Sharktooth Insert is a new, labor-saving, pre-engineered, high-strength insert from H&B. - Serrated shark-tooth design allows insert to resist high vertical shear loads (eliminates potential for vertical slip due to inadequate bolt torque, as with wedge style inserts). - Rebar interference not an issue (unlike post-installed expansion bolts). - Additional rebar hairpins not required to develop published working loads. - Allows for vertical adjustment along full length of insert. - Welded connections not required. Nut or bolt connection into insert allows for easy installation and adjustment. - Bolting hardware is U.S. standard thread (metric thread can be difficult to source).
- Custom design available for special load requirements. Sharktooth Insert Patent # D724769. Other Patents Pending.
CSH-4
CSH-R
CSH-4 cast into the underside of the concrete slab to accept pipes, ductwork, mechanical equipment, etc.
CSH-R cast into radial concrete to accept handrails.
CSH INSERTS meet the demand for a high strength continuous slotted insert for use in applications requiring high working loads.
26
www.h-b.com | 800-645-0616
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64Powered by FlippingBook